For the production of negative molds based on epoxy, we recommend epoxy mold making Gelcoat Resinpal 2304. This black-colored fine-layer resin has a high heat resistance, is highly viscous and abrasion-resistant. The highly thixotropic epoxy gelcoat is also resistant to polyester resins dissolved in styrene. Epoxy mold making Gelcoat Resinpal 2304 is suitable for applications in vehicle, tool, boat or model making.
The scratch-resistant, permanent and brushable mold construction Gelcoat Resinpal 2304 on epoxy basis is characterized by very good processing properties. In contrast to polyester top layer resins, which show shrinkage when hardening, which can cause components to warp, the top layer resin Resinpal Formenbau Gelcoat 2304 hardens without shrinking and forms a high-gloss surface. You can easily apply the epoxy gelcoat with a flat brush. You can recognize unevenness in the shape particularly easily thanks to the black color.
Epoxy mold making Gelcoat Resinpal 2304 is mixed with a hardener amount of 10 percent (mixing ratio: 100: 10 by weight) and should be stirred homogeneously before processing. You can achieve an even layer thickness by applying the gelcoat twice. Please note that the first layer should be gelled before the second top layer is applied. The minimum processing temperature should be 20 °C.
| Item information |
Value |
| Shipping weight: |
22,00 kg
|
| Content: |
22,00 kg
|
Für welche Anwendung kann man das Epoxid Formenbau Gelcoat Resinpal 2304 einsetzen? Das Epoxid Gelcoat Resinpal 2304 wird zum Bau von Negativformen auf Basis Epoxidharz verwendet.
Wieviel Epoxidhärter muss Resinpal 2304 zugesetzt werden? Die Härterzugabe beträgt 100:10 Epoxidharz zu Epoxidhärter per Gewicht.
Ist das Epoxid Gelcoat Resinpal 2304 schleifbar?Ja, nach der Aushärtung kann die Gelcoat Schicht geschliffen und aufpoliert werden.
