The complete package contains all the products required for the production of unclear figures, duplications, climbing holds, model molding and much more. The set consists of Resinpal 1818 polyurethane quick casting resin, which can be configured with two different hardeners (3-minute hardener or 6-minute hardener -hardener), a mixing cup and a stir stick. Resinpal 1818 is ideal for pouring heights of up to 5 cm and hardens within 45 minutes without being tacky.
The two-component system of resin and hardener is mixed homogeneously in a mixing ratio of 1:1 by weight. Due to its high flowability, the low-shrinkage resin finds its way through the finest structures for perfect impressions.
We recommend a room temperature of at least 18°C for processing.
What are the advantages of Resipal 1818 polyurethane quick cast resin? Resinpal 1818 is a two-component quick cast resin. The casting can be demoulded after just 45 minutes. Very small and thin-walled models can also be produced with Resinpal 1818, which nevertheless have a very high level of stability. Another advantage is the high heat resistance after curing. Due to its low viscosity, the polyurethane resin can also be cast in complicated shapes.
Is Resinpal 1818 crystal clear? No, Resinpal 1818 is beige and not crystal clear.
What do I have to consider during processing? Resinpal 1818 resin component and Resinpal 1818 hardener component are to be mixed in a ratio of 1:1 by weight. The mixture consisting of resin and hardener must be mixed homogeneously.
What precautions should I take before processing? When processing polyurethane resin, it is always advisable to ensure good ventilation of the work area. Wearing work gloves and safety goggles is mandatory.