Epoxy resin Resinpal 2404-H is a white pre-colored epoxy gelcoat.
The tear-resistant gel coat is ideal for placing in a negative mold. Due to the highly thixotropic setting of the Epoxy Gelcoat Resinpal 2404-H, it can be easily applied to vertical surfaces without it running off.
The Gelcoat Resinpal 2404-H hardens sticky on the air side. This means that reinforcement fibers can also be incorporated in difficult and complex shapes.
The gelcoat Resinpal 2404-H hardens sticky on the air side. This means that reinforcing fibers can also be incorporated into difficult and complex shapes.
Resinpal 2404-H forms a grindable and scratch-resistant protective layer around the component.
Epoxy Gelcoat Resinpal 2404-H is mixed in a ratio of 100:17 (by weight) with the supplied hardener. The mixture must be stirred until homogeneous. Resinpal 2404-H can be mixed with epoxy color pastes. The optimal processing temperature is 18 degrees. The processing time is approx. 20 to 25 minutes.