Resinpal 2404-H epoxy resin is a clear epoxy gelcoat.
The crack-prone gelcoat is ideal for inserting into a negative mold. Due to the highly thixotropic setting of the epoxy gelcoat Resinpal 2404-H, this can be easily applied to vertical surfaces without it flowing off.
The gelcoat Resinpal 2404-H hardens sticky on the air side. This means that reinforcing fibers can also be incorporated into difficult and complex shapes.
Resinpal 2404-H forms a UV-stabilized, scratch-resistant protective layer around the component.
Epoxy Gelcoat Resinpal 2304-H is mixed with the supplied hardener in a ratio of 100: 50 (by weight). The mixture must be stirred homogeneous. Resinpal 2404-H can be mixed with epoxy color pastes. The optimal processing temperature is 18 °C. The processing time is approx. 20 to 25 minutes.